EMC 69001166 manual HBA port is logged in to, Switch port Port, To the switch port Port

NetWare Installation Checklists

Task		With Access Logix		Without Access Logix		Reference Document
10	Server	❑ Cable any additional HBA ports to		❑ Cable any additional HBA ports to		Storage-system setup
	Cable additional		the switch connected to the		the switch connected to the	guide.
			storage system or to SP ports.		storage system or to SP ports.
	HBAs to
	switches or	❑ Checkpoint - For a SAN, verify		❑ Checkpoint - For a SAN, verify the
	storage system
			the HBA connections to the		HBA connections to the switch by
			switch by checking the LED(s) for		checking the LED(s) for the switch
			the switch port connected to each		port connected to each additional
			additional HBA port.		HBA port.
			For a 1-Gbit switch - LED is		For a 1-Gbit switch - LED is
			green, which indicates that the		green, which indicates that the
			HBA port is logged in to the		HBA port is logged in to the switch
			switch port.		port.
			For a 2-Gbit switch - One of the		For a 2-Gbit switch - One of the
			following:		following:
			• The left LED is green and the		• The left LED is green and the
			right LED is off, which		right LED is off, which indicates
			indicates that a 1-Gbit SP port		that a 1-Gbit SP port is logged in
			is logged in to the switch port.		to the switch port.
			• For a DS-xxB2 switch, both		• For a DS-xxB2 switch, both
			LEDs are green, which		LEDs are green, which indicates
			indicates that a 2-Gbit HBA		that a 2-Gbit HBA port is logged
			port is logged in to the switch		in to the switch port.
			port.		• For a DS-xxM2 switch, the left
			• For a DS-xxM2 switch, the left		LED is blue and the right LED is
			LED is blue and the right LED		off, which indicates that a 2-Gbit
			is off, which indicates that a		HBA port is logged in to the
			2-Gbit HBA port is logged in to		switch port.
			the switch port.
11	Switches	For a SAN		For a SAN		Switch management
	Zone for	❑ Zone the switches to provide a		❑ Zone the switches to provide a		documentation
	additional HBAs		path from each additional HBA		path from each additional HBA port
			port (host initiator) to the SPs.		(host initiator) to the SPs.
		❑	Checkpoint - Use switch	❑	Checkpoint - Use switch
			management software to verify		management software to verify the
			the switch connections to the		switch connections to the storage
			storage system.		system.
12	Server	❑	Reboot the server.	❑	Reboot the server.
	Register	❑	Checkpoint - Use Navisphere			Navisphere Manager
	additional HBAs
	with storage		Manager’s Connectivity Status			administrator’s guide
			dialog box to verify that each new			and online help
	system
			HBA is registered with the
			storage system.

PowerPath Checklist — Existing NetWare Server and Existing Storage System

4-35