EMC 69001166 manual Access Logix, SnapView, SAN Copy, MirrorView

Windows Installation Checklists

Prerequisites	◆	All switches must be installed.
	◆	Storage systems must be set up, initialized (if required), and
		connected to switches, and any optional storage-system software
		(Access Logix, SnapView, SAN Copy, MirrorView,
		MirrorView/A) you have must be installed.

◆

◆

You have installed Navisphere Manager.

If any storage systems have SnapView, the admsnap utility must be installed on the servers that will be the SnapView production and secondary hosts.

◆If any storage systems have SAN Copy, the admhost utility must be installed on the servers that have access to LUNs participating in a SAN Copy session.

◆You must have a host that is

•Running an operating system that can support the Navisphere Manager 6.X browser-based client. For an up-to-date list of such operating systems, refer to the Navisphere Manager 6.X release notes on http://powerlink.emc.com.

•On a network that is connected to the storage-system servers and that will be connected to the SPs in the storage systems.

◆You must have planned your LUNs and RAID Groups, and Storage Groups if you have Access Logix. Be sure to consider requirements for SAN Copy, SnapView, and MirrorView if you have this software. The EMC CLARiiON CX300, CX500, CX500i, and CX700 Storage Systems Configuration Planning Guide (P/N 300-001-273) will help you with this planning.

7-58

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems