EMC 69001166 manual Restart the Navisphere Host Software for Linux, Installation Guide Utility

				Linux Installation Checklist
Task		With Access Logix	Without Access Logix	Reference Document
11	Server	❑ To make LUNZs visible to the	❑ To make LUNZs visible to the	Linux documentation
	Register	HBAs, either reload the HBA	HBAs, either reload the HBA
		driver or reboot the server.	driver or reboot the server.
	additional HBAs
	with storage	❑ If you reloaded the HBA driver,	N/A	CX-Series Server
	system
		restart the Navisphere Host		Software for Linux
		Agent or run Navisphere Server		Installation Guide
		Utility.
		❑ Checkpoint - Use Navisphere		Navisphere Manager
		Manager’s Connectivity Status		administrator’s guide
		dialog box to verify that each HBA		and online help
		is registered with the storage
		system.
12	Server	❑ Use Navisphere Manager to	N/A	Navisphere Manager
	Make LUNs	disconnect and then reconnect		administrator’s guide
		the server and its Storage Group.		and online help
	available to
	additional HBAs	❑ Reboot the server to scan for new	❑ Reboot the server to scan for new
		LUNs.	LUNs.
		❑ Checkpoint - Make sure all LUNs	❑ Checkpoint - Make sure all LUNs	Linux documentation
		have entries in the	have entries in the
		/proc/scsi/scsi directory and in	/proc/scsi/scsi directory and in
		the file for the HBAs in the	the file for the HBAs in the
		/proc/scsi directory.	/proc/scsi directory.
		If any LUN entries are missing	If any LUN entries are missing
		from the file, verify the zoning.	from the file, verify the zoning.
		For an FC4500 storage system	For an FC4500 storage system	Storage-system setup
		❑ Disconnect the computer from	❑ Disconnect the computer from	guide
		the serial port on the storage	the serial port on the storage
		system.	system.
13	Server	❑ Make sure you have 128 sd and	❑ Make sure you have 128 sd and	PowerPath for Linux
	Prepare Server	sg devices in the /dev directory.	sg devices in the /dev directory.	installation
	for PowerPath	❑ Ensure that the PowerPath	❑ Ensure that the PowerPath
		driver’s major numbers (232-239)	driver’s major numbers (232-239)
		are not already in use.	are not already in use.
		❑ Manually unload the Navisphere	❑ Manually unload the Navisphere	CX-Series Server
		Host Agent or Navisphere Server	Host Agent or Navisphere Server	Software for Linux
		Utility.	Utility.	Installation Guide
		❑ Install any required Red Hat	❑ Install any required Red Hat	PowerPath for Linux
		patches.	patches.	installation

PowerPath Checklist — Existing Linux Server and Existing Storage System

3-35