EMC 69001166 Path has a Lunz with, Server Utility Installation Guide, Group Reboot the server

NetWare Installation Checklists

Task		With Access Logix		Without Access Logix	Reference Document
11	Server	❑	Scan for LUNs with the following	❑ Scan for LUNs with the following	NetWare documentation
	Make target SPs		NetWare command:	NetWare command:
	available		scan all luns	scan all luns
		❑	Checkpoint - Verify that each	❑ Checkpoint - Verify the paths to
			path has a LUNZ with the	each LUN with the following
			following NetWare command:	NetWare command:
			list devices	list devices
		❑ Stop and restart the Navisphere		❑ Stop and restart the Navisphere	CX-Series Server
			Host Agent or run the Navisphere	Host Agent or run the Navisphere	Software for NetWare
			Server Utility.	Server Utility.	Installation Guide
12	Storage System	❑	If the server will use an existing		Navisphere Manager
	Configure		Storage Group, use Navisphere		administrator’s guide
			Manager to connect the server to		and online help
			the Storage Group.
		❑ If the server will use a new
			Storage Group, use Navisphere
			Manager to create RAID Groups,
			bind LUNs, create the Storage
			Group, and assign LUNs to the
			Storage Group.
		❑ Use Navisphere Manager to
			connect the server to the Storage
			Group.
		❑	Reboot the server.	❑ Reboot the server.

PowerPath Checklist — New NetWare Server and Existing Storage System

4-17