EMC 69001166 manual Where, For a server with any HBAs

				HP-UX Installation Checklist
Task		With Access Logix	Without Access Logix		Reference Document
6	Server		For a FC4500 storage system		Navisphere CLI
	Set		navicli -d device systemtype		reference
	storage-system		-config a
	type (cont.)		where
			device is the storage system’s
			name.
			For an FC4500 storage system,
			go to step 8.
7	CX300, CX400,	For a server with registered HBAs	For a server with any HBAs
	CX500, CX600,	Perform this task either	Perform this task either
	CX700, or
		• across the LAN connected to the	• from an attached host or a host
	FC4700-Series
		storage-system SPs or	networked to an attached host or
	Storage System
		• from an attached host or a host	• from a laptop connected to the
	Set properties for
	PowerPath	networked to an attached host or	storage system, as described in the
		• from a laptop connected to the	storage-system initialization or
		storage system, as described in the	setup guide.
		storage-system initialization or
		setup guide.
		From the LAN			Navisphere Manager
		❑ Use Navisphere Manager’s			administrator’s guide
					and online help o
		Failover Setup Wizard (selected
		from the Tools menu on the
		toolbar) to set the following
		storage-system properties for the
		server’s existing HBA ports
		(initiators):
		Failover mode to 1
		Array commpath to Enabled

PowerPath Checklist - Existing HP-UX Server and Existing Storage System

2-35