EMC 69001166 manual Documentation that ships with the HBA or NIC and HBA or NIC

			Windows Installation Checklists
Documentation	Each checklist refers to some or all of the documents listed below. We
	recommend that you load these documents on your service laptop.
	◆ Documentation that ships with the HBA or NIC and HBA or NIC
		driver.
		The HBA documentation is also available from the following websites.
		For Emulex HBAs and drivers:
		http://www.emulex.com/ts/docoem/framemc.htm
		For QLogic HBAs and drivers:
		http://www.qlogic.com/support/drivers_software.asp
		and select EMC in the OEM-approved Drivers/Firmware list at the
		bottom of the page.
	◆ Documentation that ships with the

◆

◆

•Fibre Channel switches and switch management software

•Microsoft Windows operating system

Removing ATF or CDE Software Before Installing Other Failover Software (P/N 069001173)

PowerPath Version 4.3 Product Guide (P/N 300-001-673)

or

PowerPath Version 3.0 Product Guide (P/N 300-000-047)

◆PowerPath for Windows Version 4.3 Installation and Administration Guide (P/N 300-001-685)

or

PowerPath Version 3.0 Installation and Administration Guide for Windows (P/N 300-001-045)

◆EMC Navisphere Host Agent and CLI for Windows 2000 and NT Version 6.X Installation Guide (P/N 069001151)

◆

◆

◆

or

EMC CX-Series Server Software for Windows Installation Guide (P/N300-002-038)

EMC Navisphere Command Line Interface (CLI) Reference (P/N 069001038)

EMC SnapView Version 2.X Installation Guide (P/N 069001193, revision A02 or higher)

EMC SAN Copy Version 2.X Installation Guide (P/N 069001187)

PowerPath Configurations for Windows

7-5