EMC 69001166 PowerPath product Following ways to verify that Guide, LUNs PowerPath Administrator

					Windows Installation Checklists
Task	With Access Logix		Without Access Logix			Reference Document
16 Storage System	❑ If the server will use an existing					Navisphere Manager
Configure	Storage Group, use Navisphere					administrator’s guide
	Manager to connect the server to					and online help
	the Storage Group.
	❑ If the server will use a new
	Storage Group, use Navisphere
	Manager to create RAID Groups,
	bind LUNs, create the Storage
	Group, and assign LUNs to the
	Storage Group.
	❑ Use Navisphere Manager to
	connect the server to the Storage
	Group.
	❑ Reboot the server so Windows		❑ Reboot the server so Windows			Windows documentation
	recognizes the LUNs.		recognizes the LUNs
	Now the LUNs in the Storage		Now the LUNs look like any other
	Group look like any other disks in		disks in the server.
	the server.
	❑ Checkpoint - Use one of the		❑ Checkpoint - Use one of the			PowerPath product
	following ways to verify that		following ways to verify that			guide
	PowerPath sees all the paths to		PowerPath sees all the paths to
	the LUNs:		the LUNs:
	•	PowerPath Administrator	•	PowerPath Administrator
		(Start > Programs > EMC >		(Start > Programs > EMC >
		PowerPath Administrator)		PowerPath Administrator)
	•	PowerPath command	•	PowerPath command
		powermt display dev=all		powermt display dev=all
		class=clariion		class=clariion
	If PowerPath does not see the		If PowerPath does not see the
	LUNs		LUNs
	• Verify the server’s connection		• Verify that you registered your
		to the Storage Group.		PowerPath license key if you
	• Verify that you registered your			have one.
		PowerPath license key if you	• Verify that the storage-system
		have one.		properties are as defined in
	• Verify that the storage-system			step 13 or 14.
		properties are as defined in
		step 13 or 14.

PowerPath Checklist — New Windows Server and Existing Storage System Without Boot Disk

7-21