EMC 69001166 manual Storage-system, Navicli -np -d device Ports initiators Failovermode

HP-UX Installation Checklist

Task	With Access Logix	Without Access Logix	Reference Document
8 FC4500 Storage	From a serially connected laptop	From a serially connected laptop	Storage-system
System	❑ Use the following Navisphere CLI	❑ Use the following Navisphere CLI	initialization guide and
Set properties for			Navisphere CLI
	commands to set the following	commands to set the following
			reference
PowerPath
	storage-system properties for the	default storage-system properties:
(cont.)
	server’s existing HBA existing	navicli -np -d device
	ports (initiators):
		failovermode 1
	navicli -np -d device	navicli -np -d device
	storagegroup -sethost -host
		arraycommpath 1
	servername -failovermode 1
		where device is the name of the
	navicli -np -d device
		computer port connected to the
	storagegroup -sethost -host
		storage-system serial port (for
	servername -arraycommpath 1
		example, com1).
	where
	device is the name of the
	computer port connected to the
	storage-system serial port (for
	example, com1).
	servername is the name of the
	server with the HBAs.
	For a server with unregistered HBAs
	Perform this task either
	• from an attached host or a host
	networked to an attached host, or
	• from at a laptop connected to a
	storage-system serial port, as
	described in the storage-system
	setup guide.
	From an attached or networked host		Navisphere CLI
	❑ Use the following Navisphere CLI		reference
	commands to set the following
	default storage-system properties:
	navicli -ddevice -hhostname
	failovermode 1
	navicli -hhostname -ddevice
	arraycommpath 1
	where
	device is the storage system’s
	name
	hostname is the host’s name or
	network address.

2-38

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems