EMC 69001166 manual PowerPath product All the paths to the LUNs Guide, Administrator

			Windows Installation Checklists
Task		With Access Logix		Reference Document
19	Storage System	❑ Use Navisphere Manager to set general storage-system properties.		Navisphere Manager
	Configure	❑ Use Navisphere Manager to create RAID Groups, bind LUNs, create		administrator’s guide
				and online help
		Storage Groups, and assign LUNs to Storage Groups.
		❑ Use Navisphere Manager to connect the server to a Storage Group
		❑ Reboot the server so Windows Server 2003 or Windows_2000 recognizes		Windows documentation
		the LUNs.
		Now the LUNs in the Storage Group look like any other disks in the server.
		❑ Checkpoint - Use one of the following ways to verify that PowerPath sees		PowerPath product
		all the paths to the LUNs:		guide
		• PowerPath Administrator (Start > Programs > EMC > PowerPath
		Administrator)
		• PowerPath command
		powermt display dev=all class=clariion
		If PowerPath does not see the LUNs
		• Verify the server’s connection to the Storage Group.
		• Verify that you registered your PowerPath license key if you have one.
		• Verify that the storage-system properties are as defined in step 15.
20	Storage System	❑ Plan your monitoring configuration.		Navisphere Manager
	Set up Event	❑ Use Navisphere Manager to set user options, create templates, and set up		administrator’s guide
				and online help
	Monitor
		your monitoring configuration.
21	CX500i Storage	❑ Use Navisphere Manager to configure CHAP on the storage system, but		Storage-system setup
	System	do not enable it yet.		guide and Manager
	Configure			online help
	optional CHAP
	security

PowerPath Checklist — New Windows Server and New Storage System

7-11