EMC 69001166 manual Mount the CD-ROM PowerPath release, Loaded, One, Linux Documentation

				Linux Installation Checklist
Task		With Access Logix		Reference Document
15	Server	❑	Mount the CD-ROM.	PowerPath release
	Install PowerPath	❑	Install PowerPath.	notes and PowerPath for
				Linux installation guide
		❑ Unmount the CD-ROM and remove it from the drive.
		❑ If you have a PowerPath license key, register it.
		❑ Reboot the server to complete the installation of PowerPath.
		❑ If you loaded the HBA driver as a module, verify that all extensions are
			loaded.
		❑ Install any PowerPath patches from the Software downloads page on the
			EMC Powerlink website:
			http://powerlink.emc.com
		❑ Checkpoint - Verify that PowerPath sees all the paths to the LUNs using		PowerPath product
			the following PowerPath command:	guide
			powermt display dev=all class=clariion
			If PowerPath does not see the LUNs
			• Verify the server’s connection to the Storage Group.
			• Make sure that you registered your PowerPath license key if you have
			one.
			• Verify that the storage-system properties are as defined in step 10.
			• Verify that you have the appropriate revision of the HBA driver loaded.
16	Storage System	❑ Plan your monitoring configuration.		Navisphere Manager
	Set up Event	❑ Use Navisphere Manager to set user options, create templates, and set up		administrator’s guide
				and online help
	Monitor
			your monitoring configuration.
17	Server	❑ Create partitions or the pertinent database file systems on the LUNs.		Host connectivity guide
	Make LUNs			and Linux
				documentation
	available to Linux

PowerPath Checklist — New Linux Server and New Storage System

3-11