EMC 69001166 manual Verify that, Powermt restore Server, LVM Guide and HP-UX

HP-UX Installation Checklist

Task		With Access Logix	Reference Document
18	Server	❑ View the output of the powermt display dev=x every=2 command, and
	Test PowerPath	verify that
	with a license	• The state of the uncabled paths becomes “dead.”
	key (cont.)	• I/O continues to the remaining path(s) to the LUN, indicating that the
		path failover was successful, and PowerPath is working properly.
		❑ Reconnect the cable that you disconnected from the HBA.
		❑ If you did not follow the above steps exactly and caused any LUNs to
		trespass, restore the LUNs to their original SP with the following PowerPath
		command:
		powermt restore
19	Server	❑ Prepare the LUNs to receive data using the Logical Volume Manager	Host connectivity
	Make LUNs	(LVM).	guide and HP-UX
	available to HP-UX	If HP-UX does not recognize any LUNs, verify the connection to the	documentation
		Storage Group.

You are now ready to set up any optional software, such as SnapView or MirrorView, on the storage system.

2-12

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems