EMC 69001166 manual If currently installed, Cable HBAs to

Linux Installation Checklist

Task		With Access Logix	Without Access Logix	Reference Document
5	Storage System	❑ If currently installed	❑ If currently installed	Navisphere Manager
	Update software	storage-system software is not at	storage-system software is not at	administrator’s guide
		the required minimum revision,	the required minimum revision,	and online help
		update it.	update it.
		CAUTION During the software	CAUTION During the software
		update, hosts connected to the	update, hosts connected to the
		storage system will lose access to	storage system will lose access to
		data if they do not have failover	data if they do not have failover
		software or if all paths to an SP	software or if all paths to an SP
		are down.	are down.
6	Server	❑ Cable the HBA ports to the switch	❑ Cable the HBA ports to the switch	Storage-system setup
	Cable HBAs to	connected to the storage system	connected to the storage system	guide.
		or to SP ports.	or to SP ports.
	switches or
	storage system	❑ Checkpoint - For a SAN, verify	❑ Checkpoint - For a SAN, verify	Switch documentation
		the HBA connections to the	the HBA connections to the
		switch by checking the LED(s) for	switch by checking the LED(s) for
		the switch port connected to each	the switch port connected to each
		additional HBA port.	additional HBA port.
		For a 1-Gbit switch - LED is	For a 1-Gbit switch - LED is
		green, which indicates that the	green, which indicates that the
		HBA port is logged in to the	HBA port is logged in to the
		switch port.	switch port.
		For a 2-Gbit switch - One of the	For a 2-Gbit switch - One of the	Switch documentation
		following:	following:
		• The left LED is green and the	• The left LED is green and the
		right LED is off, which indicates	right LED is off, which indicates
		that a 1-Gbit SP port is logged	that a 1-Gbit SP port is logged
		in to the switch port.	in to the switch port.
		• For a DS-xxB2 switch, both	• For a DS-xxB2 switch, both
		LEDs are green, which	LEDs are green, which
		indicates that a 2-Gbit HBA	indicates that a 2-Gbit HBA
		port is logged in to the switch	port is logged in to the switch
		port.	port.
		• For a DS-xxM2 switch, the left	• For a DS-xxM2 switch, the left
		LED is blue and the right LED	LED is blue and the right LED
		is off, which indicates that a	is off, which indicates that a
		2-Gbit HBA port is logged in to	2-Gbit HBA port is logged in to
		the switch port.	the switch port.

3-14

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems