Snapper 1694946 installation instructions Installation Instructions, Rear Weight Carrier Kit

Installation Instructions Rear Weight Carrier Kit

D		B
	A	C

Figure 3. Install Front Weight Carrier Bracket

A.Capscrews, 7/16-14 x 2 (Existing)

B.Locknut, Flange, 7/16-14 (Existing)

C.Bracket, Front Weight Carrier (New)

D.Front Axle (Existing)

BRACKET INSTALLATION

1.Install the new bracket (C, Figure 3) to front axle (D) securing with existing 7/16-14 capscrews (A) and existing 7/16-14 locknuts (B).

WEIGHT AND DECK INSTALLATION

1.Use one of the rods (A, Figure 5) in the lower hole of bracket (D) to Install Mower Deck. See Operator’s Manual MOWER DECK REMOVAL & INSTALLATION. Secure rod (A) with clip (B).

2.Insert one of the rods (A) through the hitch (D) and weight (C). Secure rod (A) with clip (B).

A

C

B

Figure 4. Remove and Discard Rod & Clip

A.Clip, Safety Pin

B.Rod

C.Hitch, Deck

	D
	A
	B
C	A

Figure 5. Rods and Weight

A.Rods

B.Clip, Hair Pin

C.Weight

D.Bracket

Snapper, INC .	Form No. 1733188-00
	Rev. 06/2005
535 Macon Street	© 2006 Simplicity Manufacturing, Inc. All Rights Reserved
McDonough, GA 30253 USA	TP 200-4306-00-AT-N

2