EMC 69001166 manual Connect to, Management, Cable to Fibre, Channel, Switches, Network, or

Windows Installation Checklists

Task		With Access Logix	Without Access Logix	Reference Document
6	Server	❑ If the server will be a SnapView	N/A	CX-Series Server
	Install admsnap	production or secondary host,		Software for Windows
		install the admsnap utility.		installation guide or
	and/or admhost
				SnapView installation
				guide (revision A02 or
				higher)
		❑ If the server has LUNs that will		CX-Series Server
		participate in a SAN Copy		Software for Windows
		session, install the admhost		installation guide or SAN
		utility.		Copy installation guide
7	Storage System	❑ If currently installed	❑ If currently installed	Navisphere Manager
	Update software	storage-system software is not at	storage-system software is not at	administrator’s guide
		the required minimum revision,	the required minimum revision,	and online help
		update it.	update it.
		CAUTION During the software	CAUTION During the software
		update, hosts connected to the	update, hosts connected to the
		storage system will lose access	storage system will lose access
		to data if they do not have failover	to data if they do not have failover
		software or if all paths to an SP	software or if all paths to an SP
		are down.	are down.
8	Server	❑ Cable the server to the LAN	❑ Cable the server to the LAN	Storage-system setup
	Connect to	connected to the storage-system	connected to the storage-system	guide
		management port on each SP.	management port on each SP.
	storage-system
	management
	LAN
9	Server	For a CX200, CX300, CX400, CX500,	For a CX200, CX300, CX400, CX500,	Storage-system setup
	Cable to Fibre	CX600, or CX700 storage system	CX600, or CX700 storage system	guide
	Channel	❑ Cable the HBA ports to the Fibre	❑ Cable the HBA ports to the Fibre
	switches,	Channel switch connected to the	Channel switch connected to the
	network, or	storage system or to the	storage system or to the
	storage-system	storage-system Fibre Channel	storage-system Fibre Channel
	data ports	data ports.	data ports.
		❑ Checkpoint - For a SAN, verify	❑ Checkpoint - For a SAN, verify	Switch documentation
		the HBA connections to the	the storage-system connections
		switch by checking the LED(s) for	to the switch by checking the
		the switch port connected to each	LED(s) for the switch port
		HBA port.	connected to each HBA port.
		For a 1-Gbit switch - LED is	For a 1-Gbit switch - LED is
		green, which indicates that the	green, which indicates that the
		HBA port is logged in to the	HBA port is logged in to the
		switch port.	switch port.

7-16

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems