EMC 69001166 manual Display dev=x every=2, Cont

			AIX Installation Checklists
Task	With Access Logix	Without Access Logix	Reference Document
16 Server	❑ View the output of the powermt	❑ View the output of the powermt	PowerPath product
Test PowerPath	display dev=x every=2	display dev=x every=2	guide
	command, and verify that	command, and verify that
with a license key
(cont.)	• The state of the uncabled	• The state of the uncabled
	paths becomes “dead.”	paths becomes “dead.”
	• I/O continues to the remaining	• I/O continues to the remaining
	path(s) to the LUN, indicating	path(s) to the LUN, indicating
	that the path failover was	that the path failover was
	successful, and PowerPath is	successful, and PowerPath is
	working properly.	working properly.
	❑ Reconnect the cable that you	❑ Reconnect the cable that you
	disconnected from the HBA.	disconnected from the HBA.
	❑ If you did not follow the above	❑ If you did not follow the above
	steps exactly and caused any	steps exactly and caused any
	LUNs to trespass, restore the	LUNs to trespass, restore the
	LUNs to their original state with	LUNs to their original state with
	the following PowerPath	the following PowerPath
	command:	command:
	powermt restore	powermt restore

You are now ready to set up any optional software, such as SnapView or MirrorView, on the storage system.

PowerPath Checklist — New AIX Server and Existing Storage System

1-21