EMC 69001166 manual Set, Type

				HP-UX Installation Checklist
Task		With Access Logix	Without Access Logix		Reference Document
5	CX400, CX600, or	N/A	Perform this task either		Navisphere CLI
	FC4700-Series		• from an attached host or a host		reference
	Storage-System		networked to an attached host or
	Without Access		• from a laptop connected to the
	Logix
			storage system, as described in the
	Set
			storage-system initialization or
	storage-system		setup guide.
	type		❑ Use the following Navisphere CLI
			command to set the system type
			to no auto trespass:
			navicli -h hostname systemtype
			-config a
			where
			hostname is the IP address or
			network name of an SP in the
			storage system.
			Go to step 7.
6	FC4500	N/A	Perform this task either		Navisphere CLI
	Storage-System		• from an attached host or a host		reference
	Without Access		networked to an attached host, or
	Logix		• from a laptop connected to a
	Set
			storage-system serial port, as
	storage-system		described in the storage-system
	type		setup guide.
			From an attached or networked host
			❑ Use the following Navisphere CLI
			command to set the system type
			to no auto trespass:
			navicli -ddevice -hhostname
			systemtype -config a
			where
			device is the storage system’s
			name
			hostname is the server’s name or
			network address.

PowerPath Checklist - New HP-UX Server and Existing Storage System

2-15