EMC 69001166 Zone switches, Administrator guide, System sees all the LUNs and label any new LUNs

			Solaris Installation Checklists
Task		With Access Logix	Reference Document
7	Storage System	❑ Use the following Navisphere CLI command to set the default	Navisphere CLI reference
	Set	storage-system arraycommpath property with the following command:
	arraycommpath	navicli -h sp arraycommpath 1
	mode	where sp is the IP address or network name of the SP in the storage
		system.
8	Switch	❑ Verify that the servers and SPs are connected to the switch	Documentation that ships
	Connect servers		with the switches
	and SPs
9	Switch	For a SAN	Documentation that ships
	Zone switches	❑ Zone switches.	with the switches
		This provides a path from the host initiator to the SP.
		You will need to know the WWPN of the host initiators - available in the
		switch’s name server table.
		❑ Reboot the server using the reboot ---rcommand to load the drivers and
		perform a login of the host initiators and SPs to the fabric ports on the
		switch.
		❑ Checkpoint - Use switch management software to verify that the HBAs
		and storage systems are logged in to the switch as fabric ports, and to
		verify that each HBA sees only the targets (SPs) to which it is zoned.
10	Server	❑ Add persistent bindings to the HBA driver configuration file.	Solaris utilities
	Add persistent		administrator guide
	bindings
11	Storage System	❑ Before you connect the server to a Storage Group, use the Connectivity	Navisphere Manager
	Verify host	Status dialog in Navisphere Manager to verify that the host initiators are	administrator’s guide and
		registered.	online help
	initiators are
	registered
12	Storage System	❑ Use Navisphere Manager to connect servers to Storage Groups	Navisphere Manager
	Connect host		administrator’s guide and
			online help
	initiators to
	Storage Groups	❑ Reboot the server using the reboot ---rcommand so that Solaris
		recognizes the LUNs.
		Now the LUNs in the Storage Group look like any other disks in the
		server.
		❑ Checkpoint - Use the format command to verify that the operating
		system sees all the LUNs and label any new LUNs.

DMP Checklist - New Solaris Server and New Storage System

5-49