EMC 69001166 manual Saved in the following file, Switch connected to Guide, HBAs to Switches or

HP-UX Installation Checklist

Task		With Access Logix	Without Access Logix	Reference Document
9	Server	❑ Checkpoint - Use the following	❑ Checkpoint - Use the following	PowerPath product
	Install PowerPath	PowerPath command to verify that	PowerPath command to verify that	guide
		PowerPath sees the paths to the	PowerPath sees the paths to the
	(cont.)
		LUNs:	LUNs:
		powermt display dev=all	powermt display dev=all
		class=clariion	class=clariion
		If PowerPath does not see the	If PowerPath does not see the
		LUNs	LUNs
		• Verify the server’s connection	• Verify that you registered your
		to the Storage Group.	PowerPath license key if you
		• Verify that you registered your	have one.
		PowerPath license key if you	• Verify that the storage-system
		have one.	properties are set as defined in
		• Verify that the storage-system	step 7 or 8.
		properties are set as defined in	If you did not install any additional
		step 7 or 8.	HBAs in the server, go to step 11.
		If you did not install any additional
		HBAs in the server, go to step 11.
		❑ If PowerPath can see all the path	❑ If PowerPath can see all the path
		to the LUNs, save the PowerPath	to the LUNs, save the PowerPath
		configuration with the following	configuration with the following
		command:	command:
		powermt save	powermt save
		The PowerPath configuration is	The PowerPath configuration is
		saved in the following file:	saved in the following file:
		/etc/powermt.custom	/etc/powermt.custom
10	Server	❑ Cable any additional HBA ports to	❑ Cable any additional HBA ports to	Storage-system setup
	Cable additional	the switch connected to the	the switch connected to the	guide.
		storage system or to SP ports.	storage system or to SP ports.
	HBAs to
	switches or	❑ Checkpoint - For a SAN, verify	❑ Checkpoint - For a SAN, verify	Switch documentation
	storage system
		the HBA connections to the switch	the HBA connections to the switch
		by checking the LED(s) for the	by checking the LED(s) for the
		switch port connected to each	switch port connected to each
		additional HBA port.	additional HBA port.
		For a 1-Gbit switch - LED is	For a 1-Gbit switch - LED is
		green, which indicates that the	green, which indicates that the
		HBA port is logged in to the switch	HBA port is logged in to the switch
		port.	port.

2-40

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems