EMC 69001166 Default storage-system, Storage system SP in the storage system For existing HBAs

			NetWare Installation Checklists
Task	With Access Logix	Without Access Logix		Reference Document
7 CX200, CX300,	For new HBAs (cont.)	For any HBAs (cont.)		Navisphere CLI
CX400, CX500,	❑ Use the following Navisphere CLI	❑ Use the following Navisphere CLI		reference
CX600, CX700,
or FC4700-Series	commands to set the following	commands to set the following
	default storage-system	default storage-system properties:
Storage System
	properties:	navicli -h hostname failovermode
Set properties for
	navicli -h hostname	1
PowerPath
	failovermode 1
(cont.)		navicli -h hostname
	navicli -h hostname	arraycommpath 1
	arraycommpath 1	where hostname is the IP address
	where hostname is the IP
		or network name of an SP in the
	address or network name of an	storage system.
	SP in the storage system.
	For existing HBAs			Navisphere Manager
	An existing HBA is one that is			administrator’s guide
				and online help
	registered with the storage system.
	❑ Use Navisphere Manager’s
	Failover Setup Wizard (selected
	from the Tools menu on the
	toolbar) to set the following
	storage-system properties for the
	server’s existing HBA ports
	(initiators):
	Initiator Type to CLARiiON Open
	Failover mode to 1
	Array commpath to Enabled

PowerPath Checklist — Existing NetWare Server and Existing Storage System

4-31