6.1 Fault and Warning Messages
All printer functions are internally monitored. If a problem (Fault) or a potential problem (Warning) is detected, the Error Indicator (see Section 4.0.4) will be illuminated. A corresponding message will be displayed (if not within a branch of the menu system or in Quick Test Mode). These messages, along with possible solutions, are described below.
Fault Messages:
Fault Messages receive the highest display priority. If more than one fault is detected the display will cycle between messages.
þNote: To return to normal operation after the printer enters a fault condition, the fault must be corrected and then the FEED key must be pressed to clear the condition.
Printer Fault Messages
| Displayed Message | Description | Possible Solution(s) |
| |
|
| The printer has | Try cycling the printer power |
| |
|
|
| |||
|
| detected a drop in | ‘Off’ and ‘On’. If the fault |
| |
|
| the | does not clear, call for |
| |
|
|
| |||
|
| supply. | service. |
| |
|
|
|
|
|
|
|
| The printer has | Try cycling the printer power |
| |
|
|
| |||
|
| detected an analog | ‘Off’ and ‘On’. If the fault |
| |
|
| to digital circuit | does not clear, call for |
| |
|
|
| |||
|
| converter failure. | service. |
| |
|
|
|
|
| |
|
| The printer has | Try cycling the printer power |
| |
|
|
| |||
|
| detected a cutter | ‘Off’ and ‘On’. |
| |
|
| mechanism fault. |
|
|
|
|
|
|
|
| |
|
| WARNING! Use extreme |
|
| |
|
|
|
|
| |
|
|
| care: Turn ‘Off’ the printer |
|
|
|
|
| and unplug the power cord |
|
|
|
|
| before examining the cutter |
|
|
|
|
| and cable. |
|
|
|
|
| Make sure the cutter option is |
| |
|
|
| properly installed. |
| |
|
|
| Carefully examine the cutter |
| |
|
|
| for obstructions. |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 87 |
|
|
