3.2 Media Sensor Adjustment
The Media Sensor needs to be positioned so that the printer can detect the presence of media and the
ŒWith media loaded, as described in Section 3.1.1 or 3.1.2, grasp the Slide Tab and move the Sensor Eye Mark into position over media according to the table below.
•If loading media, return to the media loading instructions.
Media Sensor Selection and Adjustment
| Media Type | Sensor Eye Mark Position | Sensing Required* |
|
| Near the middle of the label | Gap |
| |
| Notched | Centered over the notch | Gap |
|
| Reflective | Centered over the black mark | Reflective |
|
| Continuous | Near the middle of the media | Continuous |
|
*See Section 4.1.2 for Sensor Type selection.
þNote: Changes to the start of print position can be made using the Print Control/Row Adjust or Row Offset (see Section 4.1.3).
17
