5.4.1Updating from Ready Mode
Update Procedure for Application Version 2.091 or greater
| Step | Displayed Message | Operator Action | Comment(s) |
| |
| 1 |
|
| Using the DOS | As an example, this would be |
|
|
|
|
| |||
|
|
|
| copy command | entered as: |
|
|
|
|
| (where ‘filename’ | copy 4212tb~1.zs lpt1 |
|
|
|
|
|
| ||
|
|
|
| is the program to be | (Where ‘lpt1’ is the host |
|
|
|
|
| loaded and ‘lpt1’ is | computer’s port; however, |
|
|
|
|
| the selected | this selection can differ to |
|
|
|
|
| interface port), |
| |
|
|
|
| include a serial or other port, |
| |
|
|
|
| enter the following: |
| |
|
|
|
| as the printer is equipped.) |
| |
|
|
|
| copy filename lpt1: | The Ready Indicator will |
|
|
|
|
|
| flash as data is received. |
|
|
|
|
|
|
|
|
| 2 |
|
| No action required. | The new application program |
|
|
|
|
| |||
|
|
|
|
| is being stored and verified. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 3 |
|
| No action required. | The printer has reset |
|
|
|
|
| |||
|
|
|
|
| automatically and is now |
|
|
|
|
|
| displaying the new firmware |
|
|
|
|
|
|
| |
|
|
|
|
| version. |
|
|
|
|
|
|
|
|
4
No action required. The new application is now running.
þNote: If ‘Uncalibrated’ is displayed, the printer must be calibrated (see Section 5.0).
78
