3.5.2On-Demand Dispensing
When equipped with the Peel and Present option, labels are dispensed from the printer one at a time, separated automatically from the liner for immediate application.
ΠWith the Peel and Present Mechanism installed on the printer, pull outward on the Latch and allow the Roller Bracket to swing forward.
• With media loaded as described in Section 3.1, press the FEED key to advance approximately 20 inches (51 cm) of media. Remove all of the labels from the backing material.
ŽRoute the backing material through the Roller Bracket as shown (the backing should go under the top black roller, then out).
•Raise the Roller Bracket up to its latched position.
23
