4.0.3Quick Test Mode: Print Test Labels
þNote: The Quick Test Mode functions are disabled while processing data from communications interfaces until the Host Timeout value expires.
Π
The DOWN ARROW key scrolls to the previous test function.
• 
The UP ARROW key scrolls to the next test function.
Ž 
The ENTER key will change the selected test label quantity of 2, 100, 1000, or 9999 (except the ‘Configuration Label’, quantity of one). Holding down the key scrolls quantities.
• 
The ESCAPE key will exit the Quick Test Mode without printing.
• 
The TEST key will print the selected test label at the selected quantity. During test label printing, this key also functions as a cancel key (the printer will prompt you for confirmation before cancellation occurs).
+You can program a time delay between the printing of test labels using the ‘Print Test Rate’ feature; see Section 4.1.7.
29
