Brady 6441, 3481 System Settings continued, Set Factory Defaults, Format Attributes, Imaging Mode

System Settings (continued)

SET FACTORY DEFAULTS		Parameters in this menu listing with the ‘²’
		symbol are the designated defaults.
	SET FACTORY DEFAULTS	Overwrite the current settings with the
		factory default settings or, if selected, will
		restore the Factory Setting File.
		þ Note: The reset will be automatic. If no
		Factory Setting File is used, all menu
		settings will be restored except CUSTOM
		ADJUSTMENTS, and the media and ribbon
		sensor calibrations.
FORMAT ATTRIBUTES		Affects the manner in which overlapping text
		and graphics are treated as the label is
		printed. Consult the Programmer’s Manual
		for details.
	TRANSPARENT	Intersecting text strings, images, and bar
		codes will not be printed. (An odd number of
		overlapping objects will print.)
	²XOR	Intersecting text strings, images, and bar
		codes print on top of one another.
	OPAQUE	Interacting text strings, images, and bar
		codes are obliterated by those formatted
		last. Each character cell is treated as
		opaque.
IMAGING MODE ♦		Instructs the printer whether to pre-image
		the label format.
		þ Note: This selection can affect the
		accuracy of time-stamped labels and label
		throughput.
	²MULTIPLE LABEL	The printer images multiple labels as
		memory permits, achieving the fastest
		throughput; however, if time-stamping, the
		time will reflect the moment the label is
		imaged rather than when actually printed.
	SINGLE LABEL	The printer images the next label only after
		the previous label has been successfully
		printed. Single processing provides time-
		stamps that are more accurate, but it slows
		label throughput time.

42