Communications (continued)
HOST SETTINGS | Settings which affect all communications | ||
|
|
| with a host. |
| HOST TIMEOUT ²10 | The number of seconds a communications | |
| SEC | port must be idle before the printer may | |
|
|
| process data from a different port. This |
|
|
| value is also used to “timeout” an image / |
|
|
| label format download. |
| CONTROL CODES ♦ | Allows the operator to change the prefix of | |
|
|
| the software commands interpreted by the |
|
|
| printer. |
|
| ²STANDARD CODES | Hex 01 = SOH command; Hex 02 = STX |
|
|
| command; |
|
|
| Hex 0x0D = Carriage Return |
|
| ALTERNATE CODES | Hex 5E = SOH command; Hex 7E = STX |
|
|
| command; |
|
|
| Hex 0x0D = Carriage Return |
|
| ALTERNATE CODES 2 | Hex 5E = SOH command; Hex 7E = STX |
|
|
| command; |
|
|
| Hex 0x7C = Carriage Return |
|
| ALTERNATE CODES 3 | Hex 5E = SOH command; Hex 23 = STX |
|
|
| command; |
|
|
| Hex 0x0D = Carriage Return |
| FEEDBACK CHARACTERS | Returns a Hex 1E, [RS], after each label | |
|
|
| successfully prints, and a Hex 1F, [US], |
|
|
| after each batch of labels is printed. |
|
| ENABLED | Feedback characters are sent to the host. |
|
|
|
|
|
| ²DISABLED | No feedback characters are sent. |
|
|
|
|
|
|
| |
| ESC SEQUENCES | Allows data containing invalid ESC control | |
|
|
| code sequences to be processed. |
|
| ²ENABLED | Normal printer operating mode. |
|
|
|
|
|
| DISABLED | ESC sequences are ignored and the data is |
|
|
| processed. Bitmapped font downloads are |
|
|
| disabled in this mode. |
51
