Brady 6441, 3481, 2461 Step, Displayed Message, Operator Action, Comments, using the front panel

To save a manually entered setup (for example, an application that required an Advanced Entry Calibration before beginning) as a configuration file using the front panel:

Step Displayed Message Operator Action Comment(s)

1	Press the	key.	You are entering
			‘Menu Mode’.
2	Use the	key	The	key can
	to scroll to ‘System		also be used.
	Settings’.
3	Press the		You are entering the
	key to select ‘System		‘System Settings’
	Settings’.		menu.
4	Press the		You are entering the
	key to select		‘Configuration File’
	‘Configuration File’.		submenu.
5	Press the	‘Save	The	key can
	key to scroll to		also be used.
	Setting As’.
6	Press the		Press the	key
	key.		to exit this selection.

7	Enter a file name using		The	key can
	the	key to	also be used.
	scroll through the
	characters.

þNote: To change an accepted character, select the delete function (solid flashing block) and press the ENTER key.

8

Use the	key	Continue entering the
to accept the character.		file name in this
		manner (“SPECIAL
		STOCK” has been
		used as an example).

þNote: To abort the “save setting” function, delete all entered characters in the file name and press the ESCAPE key.

9

Press the	key	Save complete. (To
repeatedly to save the		restore a saved file
file name and return to		using the front panel
‘Ready’.		see Section 4.1.5.)

120