Communications (continued)
PARALLEL PORT B♦
Same as Parallel Port A, for an optional Ethernet connection. If not present, this displays ‘NOT INSTALLED’ when accessed.
þ Note: If the ‘LOCKED’ message appears when attempting to access the NIC ADAPTER menu, the printer may have active print requests or multiple users may be trying to access these parameters (for example, during simultaneous telenet sessions).
NIC ADAPTER♦ |
| Network Interface Card Adapter (optional). |
| ||||
|
|
| If not present, this displays ‘NOT |
| |||
|
|
| INSTALLED’ when accessed. |
|
| ||
|
|
| NIC | Adapter | firmware | version |
|
|
|
| V3.6/5(010212) DM or later is required to |
| |||
|
|
| support the described functionality. |
|
| ||
|
|
| After making changes to these parameters, |
| |||
|
|
| save the changes, exit the menu system, and |
| |||
|
|
| cycle the printer’s power ‘Off’ and ‘On’ for |
| |||
|
|
| the changes to take effect. |
|
| ||
|
|
|
|
| |||
|
|
| þ Note: With the NIC Adapter installed, a |
| |||
|
|
| boot process (taking up to two minutes, |
| |||
|
|
| depending upon the configuration) must |
| |||
|
|
| be completed before the printer |
| |||
|
|
| recognizes the option as ‘installed’. During |
| |||
|
|
| this time, the NIC Adapter will not be |
| |||
|
|
| accessible or | configurable; | "NOT |
| |
|
|
| INSTALLED" will be indicated when in the |
| |||
|
|
| menu system or on a Configuration Label. |
| |||
|
|
| After the process, you will be able to |
| |||
|
|
| configure the options provided using the |
| |||
|
|
| menu system. |
|
|
| |
|
|
|
|
| |||
| IP ADDRESS |
| The static IP address of the NIC Adapter. |
| |||
|
|
| This is in standard |
| |||
| SUBNET MASK |
| The static subnet assigned to the NIC |
| |||
|
|
| Adapter. |
|
|
|
|
| DEFALUT GATEWAY |
| The network gateway address the NIC |
| |||
|
|
| Adapter should use. |
|
|
| |
48
