4.1.3Print Control
+Refer to Section 2.1.1 for detailed information on print quality controls.
HEAT |
| Controls the |
²10 | This is the equivalent of Heat Setting on most | |
|
| label software programs. |
|
| |
PRINT SPEED | Controls the rate of label movement during | |
|
| the printing process; see Appendix C. |
|
| |
FEED SPEED | Controls the rate of label movement between | |
|
| printing areas; see Appendix C. |
|
| |
REVERSE SPEED | Controls the rate of label movement during | |
|
| backup positioning for start of print, cutting |
|
| or present distance; see Appendix C. |
|
| |
ROW OFFSET | Shifts the vertical start of print position. This | |
²00.00in | is the user setting for row adjustment. | |
|
| |
COLUMN OFFSET | Shifts the horizontal, | |
²00.00 in |
| print position to the right without shifting the |
|
| Label Width termination point to the right. |
|
| This is the user setting for Column Adjust. |
|
| |
PRESENT DISTANCE | Sets the label stop position past the start of | |
²0.00 in | print. When the next label format is received, | |
|
| the printer will automatically backfeed to the |
|
| start position. If a quantity of more than one |
|
| label is printed without a present sensor |
|
| enabled, or if the present distance is set to |
|
| zero, the printer will operate without |
|
| reversing. |
35
