Brady 3481, 6441, 2461 manual Loading Media

3.1 Loading Media

Begin loading as follows:

ŒRaise the Access Cover.

•Rotate the Printhead Latch forward and raise the Printhead Assembly.

ŽSlide the Media Guide out away from the frame and then lower it to the down position.

•If using roll media, the Media Hub can accept 3.0-inch (76mm) and 1.5- inch (38mm) cores. To use 1.5-inch cores, first slide off the 3 Inch Hub by grasping and then pulling it firmly outward.

•Proceed according to the type of media you are using: either go to Section 3.1.1 for Roll Media or go to Section 3.1.2 for Fan-Fold Media.

14