Brady 2461, 3481, 6441 System Settings continued, Sop Emulation, Back After Print, Menu Language

System Settings (continued)

SOP EMULATION		Enables the <STX>O and <STX>f print
		positioning commands to allow backward
		compatibility with label formats designed
		for other printers. (When changing these
		values, the printer will automatically feed
		two labels to setup the new print position.)
	110 (PRODPLUS)	Emulates the Prodigy Plus® printer.
	220 (ALLEGRO)	Emulates the Allegro® printer.
	250 (PRODIGY)	Emulates the Prodigy™ printer.
	²DISABLED	No emulation, natural start of print position.
BACK AFTER PRINT		When the present distance is set with the
		cutter, present sensor or GPIO option
		enabled, this setting determines the timing
		of the label back up.
	ENABLED	Commands the printer to immediately back
		up the label after the cut operation, the
		GPIO start of print signal is received, or the
		present sensor is clear. It provides the
		advantage of faster throughput.
	²DISABLED	The printer will not initiate repositioning
		until the next label is ready to print. May
		help prevent the curling of the label edge.
MENU LANGUAGE ♦		Selects the language in which the menu
		system messages and configuration label
		are shown. Only languages that are resident
		will be available.
	²ENGLISH	English
	FRENCH	French
	ITALIAN	Italian
	GERMAN	German
	SPANISH	Spanish
	USER DEFINED	User defined, downloaded language(s).

46