Brady 2461, 3481 Updating from Download Mode, Step, Displayed Message, Operator Action, Comments

5.4.2 Updating from Download Mode

Required Update Procedure for Application Version 2.08 or earlier*

Step	Displayed Message	Operator Action	Comment(s)
1		Press and hold the	The Boot Loader version
		PAUSE and TEST	is displayed.
		keys while turning
			þ Note: This information
		‘On’ the printer to	will vary with the printer
		enter the Download	model and Boot Loader
		Mode.	version.
2		Using the DOS	The printer is ready to
		copy command,	accept the new application
		copy the filename	version.
		to the printer (see	þ Note: The parallel port
		Step 2 in Section	(LPT1) must be used to
		5.4.1).	write to the printer.
3		No action required.	The printer is receiving
			the new image (program).
4		No action required.	The program has been
			received and verified;
			now memory is being
			cleared of the previous
			application.
5		No action required.	The new program is being
			written into Flash
			memory. Upon
			completion, the printer
			will automatically reset
			and start the new
			application.
			þ Note: If ‘Uncalibrated’
			is displayed, the printer
			must be calibrated (see
			Section 5.0).

*This can also be used as an alternate download method for all other version levels.

79