EMC 69001166 manual PowerPath Checklist New HP-UX Server and New Storage System, Install HBAs

HP-UX Installation Checklist

PowerPath Checklist - New HP-UX Server and New Storage System

Tasks highlighted with grey in the checklist should be completed before the service provider arrives

Task		With Access Logix	Reference Document
1	Server	❑ Install the HBAs.	HBA documentation
	Install HBAs,	❑ Connect a cable from each host HBA port to a switch port or an SP port.
	drivers, cables
		❑ Install the HBA driver.
2	Server	❑ Set the HBA driver parameters to the values required for CLARiiON.	Host connectivity
	Set HBA driver	❑ Reboot the server to complete the installation of the drivers.	guide and HBA
			documentation
	parameters
3	Server	❑ Install the Navisphere Host Agent and CLI.	CX-Series Server
	Install Host Agent		Software for HP-UX
			Installation Guide
		❑ Modify user login scripts.
		❑ Edit the Navisphere Host Agent configuration file agent.config file as
		follows:
		• Add the following entry if it does not already exist:
		device auto auto
		• Add at least one privileged user.
		❑ Continue to edit the Navisphere Host Agent configuration file agent.config	CX-Series Server
		file as follows:	Software for HP-UX
		• Comment the OptionsSupported Autotrespass entry as follows:	Installation Guide
		# OptionsSupported Autotrespass
		The above entry will set the initiator type for the HBAs to no auto
		trespass when they register with the storage system:
		• Edit any other entries as desired.
4	Server	❑ If the server will be a SnapView production or secondary host, install the	CX-Series Server
	Install admsnap	admsnap utility.	Software for HP-UX
			Installation Guide

PowerPath Checklist - New HP-UX Server and New Storage System

2-7