EMC 69001166 manual Make sure the HBA driver HP-UX Host, Above entry will set

HP-UX Installation Checklist

Task		With Access Logix	Without Access Logix	Reference Document
5	Server	❑ Make sure the HBA driver	❑ Make sure the HBA driver	HP-UX Host
	Set HBA driver	parameters are set to the values	parameters are set to the values	connectivity guide and
		required for CLARiiON and	required for CLARiiON and	HBS documentation
	parameters
		PowerPath.	PowerPath.
		CAUTION Using improper	CAUTION Using improper
		settings can cause erratic failover	settings can cause erratic failover
		behavior, such as greatly	behavior, such as greatly
		increased I/O delays.	increased I/O delays.
6	Server	❑ Edit the Navisphere Host Agent		CX-Series Server
	Set	configuration file agent.config to		Software for HP-UX
	storage-system	comment the OptionsSupported		Installation Guide
	type	Autotrespass entry as follows:
		# OptionsSupported
		Autotrespass
		The above entry will set the
		initiator type for the HBAs to no
		auto trespass when Host Agent is
		restarted in the next step.
		❑ Log in as root and restart the	❑ Log in as root and restart the
		Navisphere Host Agent with the	Navisphere Host Agent with the
		following HP-UX commands:	following HP-UX commands:
		/sbin/init.d/agent stop	/sbin/init.d/agent stop
		/sbin/init.d/agent start	/sbin/init.d/agent start
		For an FC4500 storage system, go to	❑ From the server, use the following	Navisphere CLI
		step 8.	Navisphere CLI command to set	reference
			the system type to no auto
			trespass:
			For a CX400, CX600, or
			FC4700-Series storage system
			navicli -h hostname systemtype
			-config a
			where hostname is the IP address
			or network name of an SP in the
			storage system.

2-34

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems