EMC 69001166 manual Other cases, Solaris utilities kit, To which it is zoned

Solaris Installation Checklists

Task		With Access Logix		Without Access Logix		Reference Document
11	FC4500 Storage			❑ From the computer connected to		Navisphere CLI
	System (cont.)				the storage system’s serial port,	reference
					use the following Navisphere CLI
					commands to set the following
					default storage-system
					properties:
					navicli -np -d device
					failovermode 1
					navicli -np -d device
					arraycommpath 1
					navicli -np -d device
					unitserialnumber lun (only for
					server in a Sun Cluster; it must
					left at the default setting for all
					other cases)
					where device is the name of the
					computer port connected to the
					storage-system serial port (for
					example, com1).
12	Server	❑	Add persistent bindings to the	❑ Add persistent bindings to the		Solaris utilities kit
	Make target SPs		HBA driver configuration file.		HBA driver configuration file.	administrator’s guide
	available	❑	Edit the /kernel/drv/sd.conf file	❑	Edit the /kernel/drv/sd.conf file	Solaris driver.conf man
			to add any additional LUNs you		to add any additional LUNs you	page
			will bind and their targets.		will bind and their targets.
		❑ Reboot the server using the		❑ Reboot the server using the		Solaris documentation
			reboot - - -r command so the		reboot - - -r command so the
			HBA can see the targets (SPs).		HBA can see the targets (SPs).
		❑	Checkpoint - Verify that each	❑	Checkpoint - Verify that each
			HBA sees only the targets (SPs)		HBA sees only the targets (SPs)
			to which it is zoned.		to which it is zoned.

5-20

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems