EMC 69001166 manual Reference CX600, CX700, Default storage-system Properties

			Linux Installation Checklist
Task	With Access Logix	Without Access Logix	Reference Document
5 CX200, CX300,	For new or replacement HBAs	For any HBAs (cont.)	Navisphere CLI
CX400, CX500,	(cont.)	❑ Use the following Navisphere CLI	reference
CX600, CX700,	❑ Use the following Navisphere CLI	commands to set the following
or FC4700-Series
Storage System	commands to set the following	default storage-system
	default storage-system	properties:
Set properties for
	properties:	navicli -h hostname
PowerPath
	navicli -h hostname	failovermode 1
(cont.)
	failovermode 1
		navicli -h hostname
	navicli -h hostname	arraycommpath 1
	arraycommpath 1	where hostname is the IP
	where hostname is the IP	address or network name of an
	address or network name of an	SP in the storage system.
	SP in the storage system.
	For existing HBAs		Navisphere Manager
	An existing HBA is one that is		administrator’s guide
			and online help
	registered with the storage system.
	❑ Use Navisphere Manager’s
	Failover Setup Wizard (selected
	from the Tools menu on the
	toolbar) to set the following
	storage-system properties for the
	server’s existing HBA ports
	(initiators):
	Initiator Type to CLARiiON Open
	Failover mode to 1
	Array commpath to Enabled

PowerPath Checklist — Existing Linux Server and Existing Storage System

3-31