EMC 69001166 manual Server If the server is in a cluster, Cluster leave, Uldncs

NetWare Installation Checklists

.

Task		With Access Logix		Reference Document
1	Server	❑ If you need additional HBAs to provide more paths to the storage system,		HBA documentation
	Install additional	install these HBAs.		(see URL on page 4-4)
	HBAs	CAUTION Do not connect cables to the HBAs until you are told to do so
		later in this procedure.
		❑ Verify HBA BIOS settings.
2	Server	If the server is in a cluster		NetWare documentation
	Prepare cluster	❑ Move cluster resources from server you want to upgrade.
		❑ If the server is not running ULDNCS, remove the first from the cluster with
		the following command:
		cluster leave
		❑ Unload cluster software with the following command:
		uldncs
3	Server and Client	❑ If ATF or CDE is installed, then before continuing either remove it yourself		Removing ATF or CDE
	Remove ATF or	(see caution before this checklist) or arrange to have EMC Professional
		Services remove it.
	CDE
4	Server	❑ If the following software is currently installed and not at the required		HBA documentation
	Update Software	minimum revision (see page 4-3), update it:		(see URL on page 4-4),
				CX-Series Server
		•	HBA driver
				Software for NetWare
		•	Navisphere Host Agent
				Installation Guide
		•	admsnap
5	Server	❑ Make sure the HBA driver parameters are set to the values required for		Host connectivity guide
	Set HBA driver	CLARiiON and PowerPath.		and HBA documentation
				(see URL on page 4-4)
	parameters	CAUTION Using improper settings can cause erratic failover behavior,
		such as greatly increased I/O delays.

4-22

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems