EMC 69001166 Cable, From which you will management the storage system Guide, Management Ports

Windows Installation Checklists

Task		With Access Logix	Reference Document
5	Server	❑ Install PowerPath.	PowerPath release
	Install PowerPath	❑ Reboot the server to complete the installation of PowerPath.	notes and PowerPath for
			Windows installation
		Contrary to what the PowerPath documentation states, PowerPath will not	and administrator’s
		see any logical disks (LUNs) in the storage system at this point because	guide
		the storage system has not been connected.
		❑ Install any PowerPath patches from the Software downloads page on the
		EMC Powerlink website:
		http://powerlink.emc.com
6	Storage System	❑ Install the storage system in the cabinet, if not already installed.	Rails and cabinet
	Install		documentation
7	Storage System	❑ Cable the storage-system management port on each SP to the network	Storage-system setup
	Cable	from which you will management the storage system.	guide
	management
	ports
8	Storage System	❑ Install the Navisphere Initialization Utility on a host on the same subnet as	Storage-system setup
	Initialize and	the storage-system management ports.	guide
	install software	❑ Use the Navisphere Initialization Utility to initialize the storage system.
	enablers
		❑ If you have SAN Copy, SnapView, MirrorView, and/or MirrorView/A	Navisphere Manager
		software, install their enablers.	administrator’s guide
		For a CX300, CX500, or CX700 storage system, continue to step 10.	and online help
		For a CX500i storage system, go to step 11.

PowerPath Checklist — Existing Windows Server and New Storage System

7-39