EMC 69001166 Commands Ioscan -fnC disk Insf -e, Entries for all Luns with, Software for HP-UX

				HP-UX Installation Checklist
Task	With Access Logix	Without Access Logix			Reference Document
14 Server	❑ Make sure that each HBA sees	❑ Verify that each HBA sees only			HP-UX documentation
Make target SPs	only the targets (SPs) to which it		the targets (SPs) to which it is
available	is zoned with the following HP-UX		zoned with the HP-UX following
	commands:		commands:
	ioscan -fnC disk		ioscan -fnC disk
	insf -e		insf -e
	❑ Verify that HP-UX sees device	❑ Verify that HP-UX sees device
	entries for all LUNS with the		entries for all LUNS with the
	following HP-UX command:		following HP-UX command:
	ioscan -fnC disk	❑	ioscan -fnC disk
	❑ Log in as root and restart the	❑ Log in as root and restart the			CX-Series Server
	Navisphere Host Agent with the		Navisphere Host Agent with the		Software for HP-UX
	following HP-UX commands:		following HP-UX commands:		Installation Guide
	/sbin/init.d/agent stop		/sbin/init.d/agent stop
	/sbin/init.d/agent start		/sbin/init.d/agent start
	❑ Make sure again that each HBA	❑ Reverify that each HBA sees only			HP-UX documentation
	sees only the targets (SPs) to		the targets (SPs) to which it is
	which it is zoned with the following		zoned with the HP-UX following
	HP-UX commands:		commands:
	ioscan -fnC disk		ioscan -fnC disk
	insf -e		insf -e
	❑ Reverify that HP-UX sees device	❑ Reverify that HP-UX sees device
	entries for all LUNS with the		entries for all LUNS with the
	following HP-UX command:		following HP-UX command:
	ioscan -fnC disk	❑	ioscan -fnC disk

PowerPath Checklist - New HP-UX Server and Existing Storage System

2-21