EMC 69001166 manual Management, Storage system For a CX-Series or, NICs

Windows Installation Checklists

Task		With Access Logix		Without Access Logix	Reference Document
11	Fibre Channel	For a Fibre Channel SAN		For a Fibre Channel SAN	Fibre Channel switch
	Switches	❑ Zone the Fibre Channel switches		❑ Zone the Fibre Channel switches	management
	Zone additional				documentation
			to provide a path from each HBA	to provide a path from each HBA
	paths		port (host initiator) to the	port (host initiator) to the
			appropriate SPs.	appropriate SPs.
		❑ If SAN Copy, MirrorView, or
			MirrorView/A is installed, create
			any required zones.
		❑	Checkpoint - Use switch	❑ Checkpoint - Use switch
			management software to verify	management software to verify
			the switch connections to the	the switch connections to the
			storage system.	storage system.
				For a CX-Series or
				FC4700-Series storage system,
				go to step 13.
				For an FC4500 storage system,
				go to step 14.
12	Storage System	❑ On the server, restart the		N/A	Navisphere Host Agent
	Register HBAs or		Navisphere Host Agent or run the		and CLI for Windows
			Navisphere Server Utility.		installation guide or
	NICs
					storage-system setup
					guide
		❑	Checkpoint - Use Navisphere		Navisphere Manager
			Manager’s Connectivity Status		administrator’s guide
			dialog box to verify that each HBA		and online help
			or NIC is registered with the
			storage system.

7-18

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems