EMC 69001166 manual Settings Network

Windows Installation Checklists

PowerPath Checklist — New Windows Server and Existing Storage System Without Boot Disk

This checklist is for an existing storage system that will not contain a Windows Server 2003 or Windows 2000 boot disk. If you want the existing storage system to contain a boot disk, use the procedure that starts on 7-25.

Tasks highlighted with grey in the checklist should be completed before the service provider arrives.

The Without Access Logix column does not apply to CX300, CX500, CX500i, and CX700 storage systems because they ship from the factory with the Access Logix enabler installed.

Task		With Access Logix	Without Access Logix		Reference Document
1	Server	❑ Install HBAs or NICs.	❑	Install HBAs.	HBA or NIC
	Install HBAs or	❑ Install HBA or NIC driver.	❑	Install HBA driver.	documentation for
					HBAs, see URL on 7-5)
	NICs and driver
2	Server with	For NICs	N/A
	CX500i storage	❑ Download and install Microsoft
	system	iSCSI Software Initiator.
		❑ Use the appropriate Microsoft			Microsoft documentation
		network tool (for example, Start >
		Settings > Network
		Connections) to assign the
		network parameters (IP address,
		subnet mask, and gateway) for
		each NIC.
		For iSCSI HBAs			QLogic SANsurfer
		❑ Download and install QLogic			documentation
		SANsurfer.
		❑ Use SANsurfer to assign the
		network parameters (IP address,
		subnet mask, and gateway) for
		each iSCSI HBA.

7-14

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems