EMC 69001166 manual Configure, Set up Event, Monito r, Devices

AIX Installation Checklists

Task		With Access Logix	Reference Document
15	Storage System	❑ Use Navisphere Manager to set general storage-system properties.	Navisphere Manager
	Configure	❑ Use Navisphere Manager to create RAID Groups, bind LUNs, create	administrator’s guide
			and online help
		Storage Groups, and assign LUNs to Storage Groups.
		❑ Use Navisphere Manager to connect the server to a Storage Group
16	Storage System	❑ Plan your monitoring configuration.	Navisphere Manager
	Set up Event	❑ Use Navisphere Manager to set user options, create templates, and set up	administrator’s guide
			and online help
	Monitor
		your monitoring configuration.
17	Server	❑ Download the following command from ftp://ftp.emc.com/pub/elab/	AIX documentation
	Configure	powerpath/aix and execute it:
	devices	emc_cfgmgr.sh
		❑ Execute the following PowerPath command:	PowerPath product
		powermt config	guide
		❑ Checkpoint - Verify that the server sees hdisk devices for the LUNs.	AIX documentation
		❑ Checkpoint - Verify that PowerPath sees all the paths to the LUNs with the	PowerPath product
		following PowerPath command:	guide
		powermt display dev=all class=clariion
		If PowerPath does not see the LUNs
		• Verify the server’s connection to the Storage Group.
		• Verify that you registered your PowerPath license key if you have one.
		• Verify that the storage-system properties are as defined in step 12.
		❑ Restart the Navisphere Host Agent or run the Navisphere Server Utility	CX-Series Server
		with the following AIX commands:	Software for AIX
		Host Agent/	Installation Guide
		etc/rc.agent stop
		/etc/rc.agent start
		Server Utility
		/usr/lpp/HOSTUTIL/naviserverutil
		❑ Checkpoint if the Host Agent is installed - Use Navisphere Manager to	Navisphere Manager
		verify that the LUNs are mapped to hdiskpower devices.	administrator’s guide
			and online help

1-10

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems