EMC 69001166 manual AIX documentation, Where n is the hdisk number for the Lunz device

AIX Installation Checklists

Task		With Access Logix	Reference Document
16	Server	❑ Download the following command from ftp://ftp.emc.com/pub/elab/	AIX documentation
	Make target SPs	powerpath/aix and execute it:
	available	emc_cfgmgr.sh
		❑ Checkpoint - Verify that AIX sees LUNZ devices with the following AIX
		command:
		lscfg grep LUNZ
		If AIX does not see LUNZ devices
		• Verify that arraycommpath is set to 1 as described in step 12.
		• Execute the following AIX command:
		emc_cfgmgr.sh
		❑ Restart the Navisphere Host Agent or run the Navisphere Server Utility	CX-Series Server
		with the following AIX commands:	Software for AIX
		Host Agent/	installation guide
		etc/rc.agent stop
		/etc/rc.agent start
		Server Utility
		/usr/lpp/HOSTUTIL/naviserverutil
		❑ Checkpoint - Use Navisphere Manager’s Connectivity Status dialog box	Navisphere Manager
		to verify that each HBA is registered with the storage system.	administrator’s guide
			and online help
		❑ List the LUNZ devices with the following AIX command:	AIX documentation
		lscfg grep LUNZ
		❑ Remove each LUNZ device with the following AIX command:
		rmdev -dl hdiskn
		where n is the hdisk number for the LUNZ device.
17	Storage System	❑ Use Navisphere Manager to set general storage-system properties.	Navisphere Manager
	Configure	❑ Use Navisphere Manager to create RAID Groups, bind LUNs, create	administrator’s guide
			and online help
		Storage Groups, and assign LUNs to Storage Groups.
		❑ Use Navisphere Manager to connect the server to a Storage Group
18	Storage System	❑ Plan your monitoring configuration.	Navisphere Manager
	Set up Event	❑ Use Navisphere Manager to set user options, create templates, and set up	administrator’s guide
			and online help
	Monitor
		your monitoring configuration.

1-26

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems