EMC 69001166 manual AIX commands Host Agent, Server using the following PowerPath command

				AIX Installation Checklists
Task		With Access Logix	Without Access Logix	Reference Document
14	Server	❑ Restart the Navisphere Host	❑ Restart the Navisphere Host	CX-Series Server
	Configure	Agent or run the Navisphere	Agent or run the Navisphere	Software for AIX
		Server Utility with the following	Server Utility with the following	installation guide
	devices (cont.)
		AIX commands:	AIX commands:
		Host Agent/	Host Agent/
		etc/rc.agent stop	etc/rc.agent stop
		/etc/rc.agent start	/etc/rc.agent start
		Server Utility	Server Utility
		/usr/lpp/HOSTUTIL/naviserverutil	/usr/lpp/HOSTUTIL/naviserverutil
		❑ Checkpoint if the Host Agent is	❑ Checkpoint if the Host Agent is	Navisphere Manager
		Installed - Use Navisphere	installed - Use Navisphere	administrator’s guide
		Manager to verify that the LUNs	Manager to verify that the LUNs	and online help
		are mapped to hdiskpower	are mapped to hdiskpower
		devices.	devices.
15	Server	If you have a PowerPath license key	If you have a PowerPath license key	PowerPath product
	Test PowerPath	Note If your PowerPath license key is	Note If your PowerPath license key is	guide
	with a license key	not registered, the load balancing	not registered, the load balancing
		policy is restricted to basic failover.	policy is restricted to basic failover.
		❑ Stop all applications accessing	❑ Stop all applications accessing
		the storage system and disable	the storage system and disable
		user logins to the server.	user logins to the server.
		❑ View the LUNs available to the	❑ View the LUNs available to the
		server using the following	server using the following
		PowerPath command:	PowerPath command:
		powermt display dev=all	powermt display dev=all
		class=clariion	class=clariion
		❑ Choose one available LUN to	❑ Choose one available LUN to
		receive I/O for the test.	receive I/O for the test.
		❑ View the paths to the chosen	❑ View the paths to the chosen
		LUN using the following	LUN using the following
		PowerPath command:	PowerPath command:
		powermt display dev=x every=2	powermt display dev=x every=2
		where x is pseudo device that	where x is pseudo device that
		represents the chosen LUN.	represents the chosen LUN.
		❑ Start I/O to the LUN.	❑ Start I/O to the LUN.

PowerPath Checklist — Existing AIX Server and Existing Storage System

1-39