EMC 69001166 manual That you will connect to the SPs in CX300, CX400, CX600

Required Host Software Revisions

HP-UX Installation Checklist

◆HP-UX operating system revision listed in the EMC Support Matrix on the Powerlink website (http://powerlink.emc.com)

◆HBA driver revision listed in the EMC Support Matrix on the Powerlink website (http://powerlink.emc.com)

◆HP-UX PowerPath

•For CX300, CX400, CX600, C4500, and FC4700-Series storage systems

Version 3.0.2 or higher

•For CX500 and CX700 storage systems Version 3.0.3 or higher

Refer to the EMC Support Matrix and the EMC PowerPath for UNIX Release Notes on the Powerlink website (http://powerlink.emc.com) for the specific revision required for your HP-UX version.

Prerequisites	◆ You must have a host that is
	• Running an operating system that can support the Navisphere
	Manager 6.X browser-based client. For an up-to-date list of
	such operating systems, refer to the Navisphere Manager 6.X
	release notes on http://powerlink.emc.com.
	• On a network that is connected to the storage-system server
	and that you will connect to the SPs in CX300, CX400, CX600,
	or FC4700-Series storage systems.
	◆ For most configurations, you must also have a host that is
	• Running Navisphere CLI version 6.X.
	• On a network that is connected to the storage-system server
	and that you will connect to SPs in CX300, CX400, CX600, or
	FC4700-Series storage systems.

PowerPath Configurations for HP-UX

2-3