EMC 69001166 manual Its Storage Group, Reboot the server to scan for new LUNs

				Linux Installation Checklist
Task		With Access Logix		Reference Document
16	Server	❑	Mount the CD-ROM.	PowerPath release
	Install PowerPath	❑	Install PowerPath.	notes and PowerPath for
				Linux installation guide
		❑ Unmount the CD-ROM and remove it from the drive.
		❑ If you have a PowerPath license key, register it.
		❑ Reboot the server to complete the installation of PowerPath.
		❑ If you loaded the HBA driver as a module, verify that all extensions are
			loaded.
		❑ Install any PowerPath patches from the Software downloads page on the
			EMC Powerlink website:
			http://powerlink.emc.com
17	Storage System	❑ Plan your monitoring configuration.		Navisphere Manager
	Set up Event	❑ Use Navisphere Manager to set user options, create templates, and set up		administrator’s guide
				and online help
	Monitor
			your monitoring configuration.
18	Server	❑ Use Navisphere Manager to disconnect and then reconnect the server		Navisphere Manager
	Make LUNs		and its Storage Group.	administrator’s guide
				and online help
	available to
	additional HBAs	❑ Reboot the server to scan for new LUNs.
		❑ Checkpoint - Make sure all LUNs have entries in the /proc/scsi/scsi		Linux documentation
			directory and in the file for the HBAs in the /proc/scsi directory.
			If any LUN entries are missing from the file, verify the zoning.
		❑ Checkpoint - Verify that PowerPath sees all the paths to the LUNs using		PowerPath product
			the following PowerPath command:	guide
			powermt display dev=all class=clariion
			If PowerPath does not see the LUNs
			• Verify the server’s connection to the Storage Group.
			• Make sure that you registered your PowerPath license key if you have
			one.
			• Verify that the storage-system properties are as defined in step 10.
			• Verify that you have the appropriate revision of the HBA driver loaded.

PowerPath Checklist — Existing Linux Server and New Storage System

3-27