Toshiba GL-1020 - page 100

06_ContManagingSystem.fm Modified: 8/7/02
Template Version 1.0
100 GL-1020 Operator’s Guide (Basic)
Rebooting the Controller
It is sometimes necessary to reboot the controller before new
settings can take effect. At other times, you may need to reboot
the controller to synchronize communication with the copier
again. If possible, avoid rebooting the controller by physically
resetting it.
The preferred way to reboot is as follows:
1Press
PRINTER/NETWORK.
2Press the PRINT tab.
The main Print menu opens.
Sample Print menu screen on copier control panel
3Press REBOOT.