Toshiba GL-1020 manual Printing in Standard Mode, Printing Single-Sided Documents

Grouping copies—prints the entire number of copies for each page printed. This option is also knows as “uncollated” mode.

Note: This control is disabled if Stapling is enabled.

Sorting copies—prints all pages of a job and sorts them into the number of sets specified in the Number of Copies field.

Note: This control is disabled if Stapling is enabled.

Setting the Output Destination

The Destination is the copier tray that receives your job.

1Click the Setup tab.

2From the Destination drop-down list, choose the output tray

Printing in Standard Mode

Documents are usually printed using what the printer driver refers to as standard layout, which means one page per piece of paper. Other layout options are book format and multiple pages per sheet.

To select standard printing mode:

1Click the Layout tab.

2Navigate to the Document Layout group box and then click

Standard.

Printing Single-Sided Documents

To select single-sided printing:

1On the Document properties window, click the Setup tab.

2From the Duplex drop-down list, choose None.

If the Duplex options are grayed out (cannot be selected), booklet printing may be enabled. Go to the Layout tab and make sure Document Layout option is set to Standard.

Printing Double-Sided Documents

Double-sided printing, called duplex printing, allows you to print documents on both sides of the paper with a choice of short or long binding edge.

Duplex options are disabled when you select Book Format on the Layout tab, as duplex long edge printing options are implicit in that mode.

GL-1020 Operator’s Guide (Basic) 95