Toshiba GL-1020 manual 205, Deleting Jobs from the Queue, Changing Proof Print Job Copy Counters

Deleting Jobs from the Queue

You can delete your pending print or scan job from the queue if it is listed on one of the Jobs pages.

1Click the Print or Scan tab.

TopAccess opens the Print or Scan Jobs page.

2For print jobs, click the sub tab for the type of job you want to delete.

3Click the check box next to the job name.

To delete all jobs, click the check mark on the header. This button sets marks on all the jobs in the list. Clicking the check mark again clears all the check marks.

4Click Delete.

While TopAccess is deleting a job the status changes to Deleting.

Changing Proof Print Job Copy Counters

After reviewing the first copy of a proof print job you can change the remaining copy count on the Proof Jobs page. The Copies column displays the number of copies for each proof job.

1Click the Print Jobs tab.

The Current Jobs page opens.

2Select the Proof page.

The page displays details for proof print jobs.

3Scroll down the list to locate the job.

4Check the box next to the job whose count you are changing.

To select all jobs, click the check mark on the header. This button marks all the jobs in the list. Clicking the check mark again clears all the check marks.

5Change the copy count number in the Copies column. The count must be between 1 and 9999.

You can change the copy count and release the job or you can release the job without changing the count.

6Click Release to release the job to printing.

After you release the job, you may monitor its status using the Current Jobs list.

GL-1020 Operator’s Guide (Basic) 205