Toshiba GL-1020 manual 226, Rip

	Definition of Common Terms
Term	Definition
Raw Print Job	A print job that is sent to the controller by means other than the
	GL-1020 printer driver. For example, using DOS commands to
	print directly to the local port, or using a different type of driver,
	such as a HP driver, to print to a GL-1020 controller.
Recoverable error	An error condition that simply requires user intervention to
	resolve, for example, paper out or paper jam.
Remote operations	Operations affecting the controller’s or digital copier’s functionality
	that are performed from a client or administrator workstation.
RIP	Raster Image Processor. A device that reads the text and
	graphics in a document and outputs a bit-mapped image to a
	printer. The acronym is used frequently as a verb, as in “The
	controller is ripping the print job.”
Saddle stitch	A binding method in which a booklet is stapled along the center
	and folded.
Scheduled Print	A printing mode that allows you to delay printing a queued job
	until a specific date and time.
Sheet insertion	A feature where a blank page is printed in between designated
	pages of the original document. Insertion Sheets are stapled with
	the original document (if stapling is requested). See also Page
	Interleaving.
Simplex	Printing on only one side of a piece of paper. See also Duplex.
SNMP	Simple Network Management Protocol. A widely used network
	monitoring and control protocol. Data is passed from SNMP
	agents, which are hardware and/or software processes reporting
	activity in each network device (hub, router, bridge, etc.) to the
	workstation console used to oversee the network. The agents
	return information contained in a MIB (Management Information
	Base), which is a data structure that defines what is obtainable
	from the device and what can be controlled. Originating in the
	Unix community, SNMP has become widely used on all major
	platforms.
Stack Feed Bypass	A paper input unit which can be used to feed single sheets of
	special paper (such as envelope, thick paper, or card) for a print
	job.
Subnet	A section within a network.

226 GL-1020 Operator’s Guide (Basic)